Rebooting the Netgear Orbi wifi router has helped many users to fix technical issues related to it. However, what if this solution itself has become a problem from quite some time? In case you are also fed up with your Orbi router restarting over and over again, then you ought to read the troubleshooting tips mentioned in this article.
Know one thing, that we will not force you to reset your networking device and set it up from scratch using the Netgear Orbi login username and password. We are well aware that this process will make your device return back to its default mode and you will have to struggle later on. That is why we have focused on the basic solutions.
How to Stop Orbi wifi Router from Rebooting?
Purchase a New Ethernet Cable
The first and foremost thing which you ought to do is to check whether the Ethernet cable in use is damaged or not. In other words, check whether it has cuts. In case, it does, then you ought to get your hands on a tape to cover those parts which are open. Once done, check whether you are able to fix the issue at hand.
On the off chance, you are not able to, it is recommended that you step out of your house and get the existing cable replaced with a new one. Make sure that when you are joining your devices with the aid of the new cable, the connection which is being established is finger-tight. Along with it, the Ethernet ports ought to be clean.
In case you are not aware as to what should be used to clean the Ethernet ports, then take our advice and do so with the assistance of a cotton swab or a fiberglass scratch brush.
Bring the Devices a Little Closer
Too much distance if is separating the networking devices, the Netgear Orbi router and the existing modem, it can also cause the Orbi keeps rebooting issue. To troubleshoot it, the second attempt that can be made from your end is to reduce the distance between the networking devices without wasting any more time.
But, it is suggested that you ensure that you are not keeping them too close to each other. Otherwise, the obvious will happen, that is, their WiFi signals will clash and once that happens, you can forget about troubleshooting the Netgear Orbi wifi router keeps rebooting issue. On the contrary, you will get stuck with more of them in the future.
For your information, in case you ever come across the Orbi app not working issue, then this troubleshooting solution can be implemented to resolve it with ease.
Change the Orbi wifi Router Location
Did not even one troubleshooting solution mentioned above help you to resolve the issue in debate? Well then, your last resort is to check whether devices and appliances have been kept in the same room where the host router is kept. In case they are, then you have found the third reason why you are being forced to go through this post.
To get rid of the issue in debate, it is recommended you change the Orbi router location and ensure that cordless phones, treadmills, mirrors, washing machines, fish tanks, televisions, baby monitors, refrigerators, Bluetooth speakers, microwave ovens, and aluminum studs are not kept near it even by mistake.
Additionally, do not keep the Orbi near thick concrete walls as they can also mess with the signals that are being emitted by it.
In Conclusion
Was your approach towards going through the information provided above good? Were you careful while reading it? Good. Now, we are certain that you were able to resolve the Netgear Orbi router keeps rebooting issue. Now, you can log in to the router, change its settings, and give it a personalized touch.
What is that? Are you not sure which all settings can be changed? Well, to get information about the same, you ought to read the specifics given in the product manual. There you will find everything that you ought to know about the settings that can be tweaked. You might have got the manual when you went to purchase the device from the market.
Read More- Netgear Router Red Light Issue in Minutes