Has your Linksys WiFi range extender lately started blinking orange lately? If yes, then it represents an internet connection problem that might stop you from accessing the Linksys WiFi extender login page in the future. Well, before it happens, we suggest you upgrade the firmware of your Linksys extender to its latest version. But, you need to keep a few things in mind while doing that. We have highlighted all the points with the help of a paragraph in the upcoming section.
Points to Remember While Updating Extender
You can update the firmware of your range extender either via the extender.linksys.com login URL or through the Linksys mobile app. The method can be picked as per your convenience. But, no matter which method you use, we suggest you not disturb the firmware update process. It will expose your extender to security threats and there are chances that the extender will become non-performing if you keep interrupting the firmware update process.
Just in case you pick the browser-based method to upgrade the firmware of your WiFi range extender, you need to ensure that you upload the firmware file as per the model number. Otherwise, you will end up bricking your WiFi device which is a problem much bigger than you are already facing. On the off-chance, performing a firmware update is of no avail, you are suggested to pay attention to the tips given ahead.
Solved: Linksys Extender Blinking Orange
Check the Extender-Router Gap
Have you placed your Linksys WiFi range extender very close to the main router? If yes, then we suggest you increase the gap separating them. This is because placing these devices very close can result in a clash of WiFi signals which is a bad thing for you and your home network. But, while increasing the gap, do not make the mistake of making the distance more than 8-10 ft. Otherwise, you will end up breaking the communication between them which is again not a good thing.
Replace the LAN Cable
In case your extender and the main router are sharing an Ethernet connection, there is a chance that the cable in use is affecting the performance resulting in the blinking orange light. So, you are suggested to check the same. If the cable is found in a non-working condition i.e. damaged state, you should not waste more time replacing it with a new one. Make sure that the chosen one is free of damages. And yes, do not forget that you have to use the correct ports for the connection process.
Ensure Stable Power Supply
If the power being supplied to your range extender is not stable, then there is also a possibility of witnessing the blinking orange light. Wondering how? Well, if the socket into which you have plugged your Linksys device is damaged, the extender is most likely is to get stuck in a reboot loop which fluctuates the internet connection every next moment. To fix things, you need to ensure that the extender is getting a stable power supply. Therefore, no matter what, never connect your Linksys extender to a non-damaged power socket. Else, you will have to reset Linksys extender to default settings and set it up from scratch.
The Concluding Thought
Witnessing the blinking orange light on a Linksys WiFi range extender is not a new thing. You can fix the situation simply with the help of hit-and-trial approaches given above. In the case of failure, you have the liberty of resetting the extender to the default factory mode. But, before opting for the ultimate hack, you should power cycle the entire home network. Why not address the technical glitches that tend to affect the home network. So, restart the WiFi devices and see if the miracle happens for you.