Netgear Nighthawk extenders are known for their unmatchable network extending quality. In this hope, millions prefer doing Nighthawk extender setup to satiate their internet hunger. But, that does not mean that device is not capable of becoming a victim of issues. These days reports regarding the non-working status of WiFi range extenders brought in by Netgear have increased. This generally happens after a power outage in the area. But, whatever the situation is, the hacks mentioned in this article will teach how to fix this problem Nighthawk Extender Stopped Working, rather than doing nothing. Read on.
Solved: Netgear Nighthawk Extender Stopped Working
Examine the Power-Related Factors: Since the form factor of a majority of Nighthawk range extenders is plug-and-play, you are suggested to check whether you have plugged your extender properly into the socket or not. If yes, then there are chances that the socket in use is now no more. What we mean to say is that maybe the socket you have used to supply power to range extender has become damaged. Therefore, the best thing that needs to be done in this case is the plugging in of the extender into another power socket that is working perfectly.
Power Cycle the Entire Network: If it was the power outage after which the Netgear Nighthawk stopped working, then it is suggested that you reboot the extender. Power outages are not a common thing after which a device stops working but technical glitches are that generally show up after power outage. Rebooting of the extender can be done by powering it off, keeping it disconnected from the power socket for a decent amount of time, and powering it up again after that. Now, see if your WiFi extender has resumed its working or not. If not, then we have a few more things to share regarding the non-working status of the extender.
Decrease the Network Traffic: Just in case your Netgear Nighthawk stopped working all of a sudden, then it would have happened due to heavy network traffic. Therefore, try to disconnect a few devices from the WiFi network of the range extender and see if start working. You can also try performing a reboot of the entire network system. The hack needs to be applied even you connect AT&T Fiber with Netgear EAX80 or the host device is from some other brand. This might help you a lot.
Note: The tip of flashing the latest firmware on the range extender can also work in your favor. This is because many stances have been noticed where a device fails to work in the lack of a firmware update. The firmware can be updated via the mywifiext.net URL or the Netgear Nighthawk mobile application.
The Bottom Line
The non-working status of the range extender means a full stop on the internet status of the devices that are accessing the extended network range. To get the issue fixed, it is recommended that you carefully follow the techniques mentioned above. Now, we are hopeful that the aforementioned techniques have helped you a lot. But, there is always a chance of failure and that chance can be eradicated if you take the final step of resetting the range extender to its very default settings. It means making it to work on the value admin for the username and password for the admin password.
You can easily do it by pushing the Reset button located on the back panel of the range extender. It is generally a tiny button that rests inside the hole with the same label. Press it very carefully. Once your extender starts flaunting the default network and admin settings, set it up once again from scratch by connecting a client device to its network i.e. Netgear_ext.