Have you done a Netgear extender setup at your home? Or are you trying to perform the setup? If you can’t connect your extender to the router and are failing to complete the setup, then this post is what you need right now. This post comprises the best solutions to remove the obstacle and get the devices connected. Once you connect them, the extender will be ready to extend the router’s signals.
Netgear Extender Not Connecting to Router: Fixed
WiFi extender should be connected to the router to extend its signals and widen the coverage area. Use the fixes that have been discussed below if you can’t get the devices connected.
1.Bring Them Closer
Netgear WiFi extender must be kept within the range of the WiFi router so that it can get its input signals properly. You ought to make certain that the extender sits within the network range of the router. Try bringing the devices closer and reduce the distance separating them so that they can communicate well. This is valid if you are making a wireless connection between the extender and the host router.
2.Change the LAN Cable
There is a possibility that you have connected the extender and router using a LAN cable. If yes, then check the condition of the cable now. Perhaps it is damaged or loose. Verify the same now. Try using another cable to make the connection and see if this helps you. While joining the devices, ensure to use the right ports. Clean the ports using a soft brush and then make the connection. Also, see to it that the cable is not loose.
3.Ensure a Stable Power
If the devices are not connecting to each other, this could be due to poor power supply to one or both devices. Let’s assume the router is not fully powered up because of damaged power socket. How will the extender get its input signals from the router in such a scenario? So, verifying the power connection to both devices is suggested now.
You should examine the power sockets and the power cables. Nothing should be damaged or loose. Make the required changes to fix the power supply. You can also use a UPS if required. As soon as the devices are turned on, try connecting them and then access mywifiext.net on a browser to carry out the setup of the extender.
4.Update the Router
An older version of the firmware on the router could also be stopping you from connecting it to the extender. Why don’t you check for updates for your router now? Log in to the router’s admin panel and check if there’s an update pending that you have ignored.
Download the latest firmware file on your PC and get it installed on the router. As soon as the firmware on the router is up to date, try to make the connection between the devices.
5.Perform a Power Cycle
Turn off the Netgear wireless extender and the host router for some time. Unplug their power cables also. If you’ve connected the devices using a LAN cable then take it out too. Let them be in the idle state for some time now. Begin by connecting the LAN cable once again. Next, power on the router first and then turn on the WiFi extender. Now, connect your computer or phone to the extender’s network. Access mywifiext login page and complete the setup of the Netgear extender.
6.Reset the WiFi Extender
If none of the above given solutions have helped you connect the extender to the router then reset the extender to the default values. Press and hold the Reset button on the extender and reset it. It has the default factory settings running on it now.
Wrap Up
After you have reset the extender, you will be able to make its connection with the internet router without getting stuck. After you have completed the Netgear extender setup, you can connect the devices in your home to its network and enjoy the extended internet signals even in those areas where you never imagined having WiFi.