One of the best solutions to get rid of blind spots in home is to install a Setek WiFi extender. It is one of the best WiFi devices that repeat that repeats the existing router’s WiFi signals to those areas where WiFi was never seen before. But, 99.9 percent of users face issues while performing Setek WiFi extender setup. If you are also among them, then this Setek WiFi extender troubleshooting blog will prove a big help to you.
Here, you are going to find some of the best fixes that will help you troubleshoot the setup-related problem with your Setek WiFi extender from the comfort of your home. Let’s get started!
Why Getting Setek WiFi Extender Setup Issues?
There could be many reasons giving you Setek extender setup issues. A few of them are outlined underneath:
- Your Setek WiFi extender is not receiving a steady power supply from its power socket
- You have not connected the extender to your host router
- Setek WiFi extender setup instructions not followed in a correct manner
- Technical glitches
- Poor internet
- Your computer or laptop is not connected to your Setek WiFi extender
That’s all! These were the reasons that have prevented you to set up Setek WiFi extender. Scroll down a little and get the Setek WiFi extender troubleshooting tips to overcome with the setup-related issues. Read on!
Getting Setek WiFi Extender Setup Issues [Fixed]
The fixes that will help you troubleshoot Setek WiFi extender setup issues are right here. You just have to go through the fixes and apply them accordingly or which you find easy.
Check the Setek WiFi Extender Power Supply
You must try troubleshooting the issue by trying this basic fix first. Yes, it could be due to improper power supply that your extender is not performing well or you are getting issues while setting it up. So, what you have to do:
- Check the extender’s wall outlet
- Ensure that outlet is working fine
- And, it is providing steady electricity to your range extender
Connect Your Setek WiFi Extender and Host Router
To setup Setek WiFi extender smoothly without getting any technical issues, it is important for you to connect it to your host router. A connection between your Setek WiFi extender and router can be made easily using an Ethernet cable. But, make sure that:
- The Ethernet cable you have is in working condition
- And, it is inserted tightly into the correct Ethernet/ internet ports of your Setek WiFi extender and router
We hope that after applying the above-mentioned two fixes, you are not struggling with Setek WiFi extender setup issues anymore. If you are still going mad because of the same problem, straightaway apply the next Setek WiFi extender troubleshooting tip.
Contact Your Internet Service Provider
You may unable to set up Setek WiFi extender if you are not receiving fast internet speed and good WiFi services from the end of your ISP. So, contact your ISP and ask him to improve your internet speed and services as soon as possible.
Bear in mind, poor internet speed and services can leave a big impact on the Setek WiFi extender setup process.
Connect Your Computer or Laptop to Setek Extender
Have you connected your Setek WiFi extender and router? Not yet? Then, you have the reason in hand – why you are unable to setup Setek WiFi extender. No worries! Make a connection between your devices now? How? Open the WiFi settings on your computer or laptop and reaching there, locate the Setek extender’s WiFi network. Once you have found the extender’s SSID, connect with it using the WiFi password.
If you don’t want to connect your Setek WiFi extender and router using a wireless source, then you can connect them in a wired manner. How? Just grab an Ethernet cable and connect its one end into your WiFi range extender and other end into your host router.
Follow the Setek WiFi Extender Setup Instructions Correctly
On the off chance, you have not followed the Setek WiFi extender setup instructions in a proper manner, then also you may have issues while setting it up. So, access the Setek extender setup page using 192.168.10.1 and default Setek WiFi extender login details (if not changed). Once you have access the extender setup page, apply the on-screen instructions and set up the Setek device right from the comfort of your home.
Pro Tip: We suggest you change the default Setek WiFi extender login details right After setting up the extender.
Restart Your Setek WiFi Extender
Argh! Still getting Setek WiFi extender setup issues? If yes, then don’t worry. This Setek WiFi extender troubleshooting post is still left. It is because of technical glitches that you are unable to set up Setek WiFi extender. Wipe out that sweat from your forehead. We have one of the best solutions to get rid of technical glitches and that is restarting the Setek extender.
To restart the Setek WiFi extender, here are the steps to be implemented:
Step 1: Unplug your Setek WiFi extender.
Step 2: Disconnect the range extender from your host router and connected client device (s).
Step 3: Keep your range extender unplugged for 5-15 minutes.
Step 4: Thereafter, plug it back in again and reconnect it with your router and computer, laptop, and other client device (s).
Now, try to setup Setek WiFi extender using 192.168.10.1 IP and Setek WiFi extender login details (manual method). We hope that this particular Setek WiFi extender troubleshooting tip will help you resolve the setup-related issue.
In you are unable to set up your WiFi range extender using the manual method, then you can use the WPS method instead. For this, you have to keep your extender and router in reach of each other. Then, press the WPS button on your router and within a minute, press the WPS button on your WiFi extender.
The Last Words
Now, we are going to end this Setek WiFi extender troubleshooting guide. Anticipating that with the help of the fixes outlined above, you can sort out the setup-related issues with your Setek WiFi range extender.