Setek extender is one of the best WiFi devices for those who want to access super-speedy internet on their devices throughout their home. Due to this, 99 percent of users across the globe are doing Setek setup using IP address 192.168.10.1 in their homes. The WiFi extender in discussion is a device that boosts the existing router’s WiFi signals and provides its users uninterrupted internet range everywhere to access throughout their house.
But, in some cases, users are getting disappointed. Why? Because they are experiencing that their Setek WiFi extender has stopped working all of sudden. If you are also experiencing the same issue, then this article can help you in making your extender working again. Hence, without much delay, continue reading this post.
Setek Extender Not Working [Why]
Here are the topmost reasons letting your Setek extender to not perform well as per expectations:
- Technical glitches
- Your Setek extender WiFi signals are getting interrupted
- No connection between your Setek extender and router
- Setek extender setup process not performed in a proper way
These were the reasons that have caused Setek extender not working issue. Scroll down a little and know how to make your WiFi device i.e. the extender working again.
Setek Extender Not Working [Fixed]
In this section, we have highlighted the top five solutions through which you will be able to resolve the Setek extender not working issue from the comfort of your home. Taking this into consideration, you must continue reading.
Restart Your Setek Extender
This fix should be applied in the first place whenever your Setek extender is not working properly. This particular fix works wonders to troubleshoot issues with the device (Setek extender). Here are the steps to restart the Setek extender:
Step 1: First things first, press the on/ off (power) on your Setek extender.
Step 2: Unplug your extender from its respective power socket.
Also, disconnect all the cable from your WiFi range extender (if connected).
Step 3: Keep your extender unplugged for 4-5 minutes.
Step 4: Thereafter, plug in back your extender again.
Step 5: Connect all the disconnected cables.
See if your range extender has started working. If not, try the next hack in line.
Relocate Your Setek Extender
If your extender’s WiFi signals are getting interrupted, then also it may not work for you. So, to get the most out of your Setek extender, it’s high time you change its current location. You must place the extender in an area in your home where it is getting least WiFi signal interference from your neighboring WiFi networks. In addition to that, we also suggest you place it (the extender) closer to your router and away from Alexa devices, baby monitors, Bluetooth speakers, and so on.
Connect Your Router and Setek Extender
No connection between your Setek extender and router will also cause the issue in discussion. So, if you want to make the most out of your range extender, it is utmost important to connet them (router and the extender).
There are two easy ways through which you can connect your range extender and router:
One: Using an Ethernet cable
Two: Using WPS source
Ethernet Cable: If you have connected your router and Setek extender with the help of an Ethernet cable, it is suggested you first check its condition prior to making a wired connection. The Ethernet cable must not be damaged. Apart from this, you must ensure that you have established a finger-tight connection between both devices, extender and router.
WPS Connection: In the event, you have connected the router and Setek extender using the WPS connection, you are suggested to verify the distance between them. make sure that they are placed in close proximity. Why? Placing them at a distance from each other won’t let them communicate properly, resulting in can’t connect Setek extender and router using WPS source. And, yes your internet router must be WPS-capable.
Perform Setek Extender Setup Properly
Are you still facing Setek extender not working issue? If you nod in yes, it means you have not configure it in a proper manner. So, to make the extender working for you smoothly, you need to reset it and perform Setek setup process from scratch.
To Conclude
Our article on how to troubleshoot Setek extender not working issue ends here. We hope that with the help of the fixes highlighted above, your extender has started working for you.